Change Region
Change Language
Eco-dFluxer SMT100 << Back
1550
Description
Eco-dFluxer SMT100 is a water-based, environmentally friendly cleaner that is designed to work in both inline and batch cleaning equipment. An optimal combination of solvents and saponifiers lowers surface tension for penetration under low stand-off s, and powerful cleaning action to remove all flux residues.
 
Effective on a wide variety of solders and fluxes: lead, lead-free, aqueous, RMA, no-clean, and new halide-free fluxes. High compatibility with common PCB metals & plastics. Eco-dFluxer SMT100 is highly filterable with long bath life. Moderate pH avoids many disposal issues.
 
High performance cleaning gives you brilliant solder joints and allows you to increase dilution, increase line speeds, reduce waste water, decrease cost per board, and most importantly… eliminate field failures due to ionic contamination!
 
Eco-dFluxer SMT100 is fully compliant with California CARB requirements. Also compliant with European REACH and WEEE initiatives. It does not contain RoHS restricted substances, SVHC listed substances, or halides.
Features & Benefits
  • Effective on a wide variety of solders and fluxes
  • Non-flammable
  • Ultra rinsable
  • High compatibility with common PCB metals & plastics
  • Highly concentrated – 10%-20% dilution
  • Biodegradable
  • Low VOC, zero GWP
  • Non-ozone depleting
  • Halide-Free
Instructions
Use as directed in your inline or batch PCB cleaner equipment instructions. Shake/agitate prior to dilution. Recommended dilution is 10-20%, depending on soil and requirements. Mix thoroughly. Higher concentration can be used to clean more difficult soils or to increase cleaning efficiency/speed. DI rinse required. Dilution can be checked using a refractometer or 1590-KIT bath analysis kit. See technical data sheet for details.

If foaming under high pressure occurs, defoaming agent, 1555, can be used to reduce foaming. Addition will be determined by sump capacity and actual cause of foaming. Add directly to sump at 1 – 4 oz (30 – 120ml) of 1555 per 100 gallons (379L).
Packaging & Availability
Sku Number Name Size Regions
1550-54G Eco-dFluxer SMT100 54 gal US / Asia, Europe, Canada
1550-5G Eco-dFluxer SMT100 5 gal US / Asia, Europe, Canada
1550-G Eco-dFluxer SMT100 1 gal US / Asia, Europe, Canada
Additional Information
Category: Flux Removers

Brands: Techspray Renew

Applications: Electronic Production / Rework, Soldering / Desoldering
MSDS
Product Brands
Asahi AK225 E-Line Fine-L-Kote G3 Kester Techform Licron Crystal No-Clean Wick Plato Platoshears Precision-V Pro Wick Slic Tech Hold Tech Roll TechBrush TechClean Techspray Techspray Industrial Techspray Renew TechSwab Trace Tech Turbo-Coat Vortex WonderMASK Zero Charge
Applications
Adhesives Aviation Cleaning Clean Room Cold/Bucket Cleaning Electrical Cleaning Electronic Production / Rework Electronic Repair / Maintenance ESD Environment Fiber Optics Cleaning Flux Application Glass & Surface Cleaning Janitorial / Sanitation Lubrication / Contact Protection Office Equipment Maintenance Plant Maintenance SMT & Wave Equipment Maintenance Soldering / Desoldering Transit Maintenance Ultra-Sonic Cleaning Vapor-Degreasing Electronic Testing / Diagnostics
Find Distributor
Please select a country
Please select a state
Techspray – US office
P.O. Box 949
Amarillo, TX 79105-0949
Tel. 806-372-8523
Toll-free 800-858-4043
Fax 806-372-8750
tsales@techspray.com
Techspray – European office
ITW Contamination Control BV
Saffierlaan 5
2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
HOME | MSDS & DATA SHEETS | FAQ | LIBRARY | CROSS REFERENCES | ABOUT US | DISTRIBUTOR SEARCH | REP SEARCH | PARTNERS
©2010 - Techspray