Blog/News

Guide to Manufacturing ESD-Safe 3D Printed Parts

Electrical and mechanical failures are the most common failure modes encountered in Printed Circuit Boards (PCBs). Another not-so-obvious failure mode that can cause catastrophic failures in electronic next...

Preventing the Destructive Power of Conductive Anodic Filament (CAF) Growth

Electrical and mechanical failures are the most common failure modes encountered in Printed Circuit Boards (PCBs). Another not-so-obvious failure mode that can cause catastrophic failures in electronic next...

The Essential Guide to Waterproofing Electronics

The current development in technology has forced electronics to move out of offices and face environmental conditions in outdoor locations. Among all environmental factors, moisture is the cause of a vast next...

Case Study: Aviation MRO Cleaning with Techspray PWR-4 Citrus HF Degreaser

A large international freight carrier used a well-known d-limonene-based product (Citri-safe by Inland Chemical) to clean various soils on the belly of the aircraft, APU areas, landing gear housing areas next...

Essential Guide to the Identification and Removal of Conformal Coating

This procedure covers the methods to identify the conformal coating so that the ideal removal method can be identified and utilized, then presents a commonly-employed removal procedure with brief summaries next...

PWR-4... Powerful Cleaning, Cost Effective, The Ideal Replacement for Vertrel-based Cleaners

Powerful Cleaning & Greater Safety All At a Great Price! Companies across industries are turning to Techspray as a replacement for expensive and difficult to find solvents, like those including 3M Novec next...

Essential Guide to Controlling ESD (Electrostatic Discharge)

Plastics and elastomers are great electrical insulators. By default, they just don’t conduct electricity in their unaltered bulk material state. The vast majority of the ESD-safe (or static-dissipative) next...

Keeping Clean During Engine Overhauls: Reciprocating Engines

If you work in the engine MRO shop, you know the struggle of tearing down an engine and cleaning its components. Even with proper care and maintenance, engines get dirty. Really dirty. Besides the effort next...

Aviation Oxygen Components: Cleanliness is Critical

Oxygen is vital to sustaining life, but the benign gas we breathe has the potential to become lethal in concentrated form. Each year, workers are harmed and killed by high-energy-yielding reactions resulting next...

EPA: Perchloroethylene (perc, PCE) Poses an “Unreasonable Risk” of Injury to Health for Dry Cleaning

June 2022 – In the report “Perchloroethylene Draft Revised Unreasonable Risk Determination for Public Comment”, the US Environmental Protection Agency (EPA) resolved that the solvent next...

Ask A Technical Question

Techspray - US office

Techspray - China office

Techspray - European office

Quick Links