Inline & Batch Cleaners

Inline & Batch Cleaners

Request Information

Request Information

Inline & Batch Cleaners

*=required field

Water-Based Cleaners for PCB Assembly

Leveraging over 40 years’ experience in electronic cleaning, Techspray offers a full line of water-based defluxers and stencil cleaners. These powerful cleaners allow you to reduce overall operating cost by increasing throughput, lowering concentration, and/or lowering wash temperature.

Eco-dFluxer Water-based Inline & Batch Flux Removers

Eco-dFluxer cleaners are water-based, environmentally friendly and designed to work in both inline and batch cleaning equipment. They are optimal combinations of solvents and saponifiers that lower surface tension for penetration under low stand-offs, and powerful cleaning action to remove all flux residues.

Effective on a wide variety of solders and fluxes: lead, lead-free, aqueous, RMA, no-clean, and new halide-free fluxes. They offer high compatibility with common PCB metals and plastics. Eco-dFluxer cleaners are highly filterable with long bath life.

High performance cleaning gives you brilliant solder joints and allows you to increase dilution, increase line speeds, reduce waste water, decrease cost per board, and most importantly… eliminate field failures due to ionic contamination!

Eco-Stencil Manual, Understencil & Batch Stencil Cleaners

Eco-Stencil cleaners are effective non-flammable drop-in replacements for isopropyl alcohol (IPA) and other solvents commonly used for stencil cleaning systems. Unique water-based blends are effective at removing a wide variety of pastes and adhesives. If full strength isn’t needed, DI water can dilute it. Eco-Stencil cleaners do not contain ionics and will not leave contaminants that will change downstream process windows or lead to board failures.

Eco-dFluxer and Eco-Stencil cleaners are fully compliant with CARB (California Air Resource Board) requirements. Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. They do not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides.

For more information, check out our A Thorough Comparison of Water Based Cleaners and Solvent Cleaners.

Eco-dFluxer SMT200 	Eco-dFluxer SMT200
Inline & batch water-based flux remover for sensitive metals
Eco-dFluxer SMT100 Eco-dFluxer SMT100
Inline & batch water-based flux remover
Eco-Stencil RF Batch Stencil Cleaner Eco-Stencil RF Batch Stencil Cleaner
Rinse-free, nonflammable stencil cleaner for batch systems
Defoamer DF1 Defoamer DF1
Defoaming agent for inline & batch cleaners

Articles

Overcoming the Challenges of Cleaning with Water-Based Chemistries
Precise cleaning has become the Key Performance Indicator (KPI) to the reliability of today’s sophisticated electronics packages. Increased miniaturization, reduced standoff heights, and the transition from ‘flux around component’ to ‘flux under component’ mandates inno...
Read This Post
Techlab Inhouse Cleaning, Coating, and Analytics Lab
TECHSPRAY COMBINES OVER 30 YEARS OF EXPERIENCE DEVELOPING HIGH PRECISION CLEANERS AND CONFORMAL COATINGS, GIVING US A UNIQUE PERSPECTIVE OF THESE INTERRELATED PROCESSES. Techspray’s TechLab offers state-of-the-art cleaning, coating and analytical services to help customers optimize their proc...
Read This Post
Repairing PCBA by Adjusting Solder Reflow Profile & Other Process Improvements
Faulty or damaged electronics assemblies obtained after batch processing is a big setback for not only the electronics manufacturers who are competing in the market, but also for the process engineers. With the increasing use of Surface Mount Technology (SMT) most defects in new electronics assembli...
Read This Post
More Articles

Videos


You did not finish submitting your information to request a sample