Techclean Purwipe

100% polyester, strong & lint-free wipe

Part # Name Size Units
Per Case
Price
Per Case
Case
Qty
 
2355-100 9"x9" flat wipe 100 ct 12 $704.76
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor
100% polyester wipe is a strong, low­linting wipe that is ideal for SMT stencil cleaning and PCB rework. Tear resistant to allow cleaning around leads without fraying.
 

Features & Benefits

  • Class 100 cleanroom qualified
  • Very low particulate count
  • Tear resistant

FAQ's

What are the proper cleanroom wiping techniques?
Proper cleanroom wiping techniques are essential to maintain the cleanliness and integrity of the controlled environment. Cleanrooms are used in various industries, such as pharmaceuticals, electronics, aerospace, and biotechnology, where even the tiniest contaminants can be detrimental to the processes or products being produced. Here are some key steps and guidelines for cleanroom wiping:
  • Use the right materials: Select appropriate wiping materials that are compatible with the cleanroom environment. Common materials include non-woven wipes, microfiber wipes, and polyester wipes. They should have low particle generation, low linting, and be free from contaminants.
  • Wear proper cleanroom attire: Before starting any wiping procedure, ensure you are wearing the appropriate cleanroom garments, including gloves, a gown, and a face mask, to prevent the introduction of particles and skin oils.
  • Prepare the wiping solution: If a wiping solution is necessary, use a cleanroom-approved cleaning agent. Some cleanrooms use isopropyl alcohol or other specialized cleaning solutions. Ensure the solution is properly diluted according to the manufacturer's recommendations.
  • Follow a wiping pattern: Adopt a systematic wiping pattern to ensure complete coverage of the area. Start from the cleanest area and work towards the dirtier zones. Avoid cross-contamination between different surfaces.
  • Use gentle pressure: Apply only light pressure while wiping to avoid damaging sensitive surfaces or releasing particles into the air.
  • One-directional wiping: Whenever possible, use one-directional wiping, moving from one side to the other, to prevent particles from being redistributed.
  • Change wipes regularly: Replace wipes frequently to avoid spreading contaminants. Dispose of used wipes properly according to cleanroom protocols.
  • Avoid wiping overhead surfaces: Wiping overhead surfaces can release particles downward, contaminating lower surfaces. Use alternative cleaning methods for these areas.
  • Follow cleanroom class-specific protocols: Different cleanrooms have different cleanliness classifications (ISO Class 1 to 9, for example), each with its specific protocols. Ensure you follow the appropriate procedures for your cleanroom class.
  • Perform regular training: All cleanroom personnel should receive proper training on cleanroom wiping techniques to ensure consistency and effectiveness.
Always adhere to the cleanroom's specific Standard Operating Procedures (SOPs) and guidelines while performing any cleaning tasks. Proper cleaning and wiping techniques are critical to maintaining a controlled environment and ensuring the quality of products or processes within the cleanroom.

Which wipe is best with aggressive solvents?

Solvent compatibility is another factor to consider when choosing a wipe. If the wipe is to be used with a solvent in the cleaning application, then the wipe must be selected with the solvent in mind. Solvent retention and absorbency may also be required. The wipe must the able to absorb a given solvent and retain the solvent within the fabric of the wipe for a sufficient amount of time, without premature release of the solvent. Knitted polyester and nylon wipes have the highest compatibility with a wide range of organic solvents and weak acids. Techclean Purwipes and Anti-Static Wipes have good absorbency, excellent durability when cleaning rough surfaces, and low ionic and organic residue contamination. The polyester/cellulose blended Techclean Wiper and Blue Maintenance Wipes have excellent resistance to solvents and weak acids, good durability when cleaning rough, abrasive surfaces, high particle entrapment and low particle and ionic contamination.  They are an economical choice for general cleaning and spill clean-up.

What wipe is best for rough surfaces?

Any wipe will produce particulates depending on the amount of abrasion it receives in use, so abrasion resistance should be considered. Wipes usually release the most particulates from their edges, so using a sealed-edge wipe will greatly reduce the particulate burden.  Heat cutting is a common method of creating a sealed edge. A hot knife cuts the edge and simultaneously fuses all the loose ends on the wipe, as in the Techclean Purwipe sealed edge poly wipes. The texture of the wipe should also be considered when critical or sensitive surfaces are involved in the application. Some wipes can abrade some critical coated optical surfaces and should therefore be avoided in such applications. TechClean Twill Wipe (2357-100) is a knit cotton wiper that is also very good on abrassive surfaces.

Articles

Choosing the Best Wipe for Your Application
In choosing the best wipe for a particular application we need to “match the wipe to the job”. When choosing a wipe for a particular application you need to consider such factors as cleanliness, abrasion resistance, solvent compatibility, and absorbency.
Read This Post
You did not finish submitting your information to request a sample