Eco-dFluxer SMT300

Sku Number Name Size Units
Per Case
Price
Per Case
Case
Qty
 
1530-G Eco-dFluxer SMT300 - 1 gal 1 gal (3.8L) 1 $92.67
1530-5G Eco-dFluxer SMT300 - 5 gal 5 gal (19L) 1 $334.47
1530-54G Eco-dFluxer SMT300 - 54 gal 54 gal (205L) 1 $3,231.66
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Eco-dFluxer SMT300 is a water-based, environmentally friendly cleaner that is designed to work in both inline and batch cleaning equipment. Powerful defluxer but safe on sensitive metals, preventing oxidation and leaving shiny solder joints. Safe, eco-friendly formula. Effective on no-clean, R, RMA, OA fluxes and new halide-free fluxes.
High performance cleaning gives you brilliant solder joints and allows you to increase dilution, increase line speeds, reduce waste water, decrease cost per board, and most importantly… eliminate field failures due to ionic contamination!
 
Eco-dFluxer SMT300 is fully compliant with California CARB requirements. Also compliant with European REACH and WEEE initiatives. It does not contain RoHS restricted substances, SVHC listed substances, or halides.

Features & Benefits

  • Effective on a wide variety of solders and fluxes, especially Halide-Free flux
  • Excellent compatibility with sensitive materials (Cu, Al, etc.), leaving shinny solder joints
  • High compatibility with common PCB metals & plastics
  • Nonflammable
  • Ultra rinsable
  • Highly concentrated – 10%-15% dilution
  • Low VOC, zero GWP
  • Non-ozone depleting
  • Halide-Free — Prevents Ionic Contamination

Articles

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Isopropyl alcohol (CAS #67-63-0), also referred to as IPA, isopropanol, and 2-propanol, may be in short supply for the coming weeks or months because of the COVID-19 (Novel Coronavirus) pandemic. This will be particularly challenging for companies using IPA for flux removal, stencil cleaning, and in...
Read This Post

A Permanent ESD-Safe Coating With Clear Benefits
  EMS and PCB repair facilities that work with static sensitive equipment are very familiar with ANSI/ESD-S20.20 and the challenge of maintaining compliance. You buy all the right benches, mats, straps, bags, and more, sometimes at a steep premium. Then in comes a stray plastic bin, cart, or...
Read This Post

How To Use Spot Mask for Wave Soldering & Conformal Coating
Say you’re a contract manufacturer of printed circuit boards (PCBs), and your customer just made an engineering change that leaves several thru-hole vias open. If you run it through the wave as is, and solder over the vacant holes, the PCB won’t function properly. How do you keep the p...
Read This Post

The Expert’s Guide to Degreasers & Maintenance Cleaners
What is a degreaser? A degreaser is a cleaner designed to remove grease, oils, cutting fluids, corrosion inhibitors, handling soils, finger prints, and other contamination common in assembly, stamping, other types of metal fabrication, refineries, motor repair, airplane hangars, and many other appl...
Read This Post
You did not finish submitting your information to request a sample