Techclean SMT Foam Wipe

Request A Sample
Sku Number Name Size Units
Per Case
Price
Per Case
Case
Qty
 
2358-50 Techclean SMT Foam Wipe - 9x9 50 ct 6 $342.24
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Polyurethane foam wipe designed for cleaning surface mount stencils and screening equipment. Fiber­free foam does not generate lint, which can clog fine pitched stencils and cause misprints.
 

Features & Benefits

  • Class 100 cleanroom qualified
  • Fiber-free construction no linting
  • Will not snag on stencils

Articles

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Isopropyl alcohol (CAS #67-63-0), also referred to as IPA, isopropanol, and 2-propanol, may be in short supply for the coming weeks or months because of the COVID-19 (Novel Coronavirus) pandemic. This will be particularly challenging for companies using IPA for flux removal, stencil cleaning, and in...
Read This Post

A Permanent ESD-Safe Coating With Clear Benefits
  EMS and PCB repair facilities that work with static sensitive equipment are very familiar with ANSI/ESD-S20.20 and the challenge of maintaining compliance. You buy all the right benches, mats, straps, bags, and more, sometimes at a steep premium. Then in comes a stray plastic bin, cart, or...
Read This Post

How To Use Spot Mask for Wave Soldering & Conformal Coating
Say you’re a contract manufacturer of printed circuit boards (PCBs), and your customer just made an engineering change that leaves several thru-hole vias open. If you run it through the wave as is, and solder over the vacant holes, the PCB won’t function properly. How do you keep the p...
Read This Post

Cleaning Electronics with Isopropyl Alcohol
Chemicals are found throughout the electronic assembly and repair process, but no solvent is more common than isopropyl alcohol. It is universally used for cleaning and as a main constituent of fluxes, but how much do you really know about isopropyl alcohol? Isopropyl alcohol (CAS #67-63-0) is also...
Read This Post
You did not finish submitting your information to request a sample