Technical Data Sheet
Turbo-Coat Acrylic Conformal Coating
TurboCoat Acrylic Conformal Coating is designed to speed up board production throughput without additional investment of expensive UV systems or other capital equipment. Conformal coating cure time is often considered a production bottleneck for PCB assembly operations. TurboCoat dries tackfree in 3 minutes, allowing manufactures to handle boards in 1/3 the time of the leading acrylic coating! Full cure can be achieved as quickly as 10 minutes with elevated temperatures.
Features & Benefits
- Fastest cure dry to touch in 3 minutes!
- Max operating temperature - to 257°F (125°C)
- Non-ozone depleting
- Dielectric strength - 1000 volts/mil
- Fast & easy rework & repair
- IPC-CC-830B & MIL-I-46058C qualified
- UL94 V-0 rated
Packaging Order minimum case quantity only. Extra shipping fees may apply.
InstructionsSurface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631). Surface must be completely dry before application of coating. As you spray or brush coating, allow material to flow around components. Coating will be tack free in approximately 5 minutes; however, full cure requires 24 hours depending on humidity and thickness of application. Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved in 1 to 3 hours by using Conformal Coating Remover (2510). Removal time depends on temperature, thickness of coating, and application.