TraceTech Conformal Coating Remover Pen

Part # Name Size Units
Per Case
Price
Per Case
Case
Qty
 
2510-N Conformal Coating Remover Pen 0.37 fl oz / 11 ml 12 $325.68
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor
Quickly and precisely removes most conformal coatings including acrylic, urethane, and silicone. Spot removing coating for solder repair gives you a cleaner final product than burning through.

Features & Benefits

  • Fast stripping action
  • Non-corrosive
  • Rapid evaporation
  • Non-ozone depleting

Applications


FAQ's

Which conformal coating remover should I use for my coating?

The difference may be more in how they’re intended to be used rather than their relative strength. Conformal Coating Remover XT (part #2130) is slower evaporating so on larger surfaces it will probably be more effective. It will reside on the board longer and therefore able to soften, penetrate and lift coatings. Fast evaporators may not be as effective over larger areas because they would tend to evaporate too quickly and redeposit the coating. 2130 is also much lower toxicity, so safer to use when ventilation is poor. Fine-L-Kote Conformal Coating Remover (#2510) is faster and probably more tuned for smaller areas or spot removal, which is why it’s the formula offered in the pen.

How do you remove conformal coating when repairing or reworking a PCB?
Techspray offers the TraceTech Conformal Coating Remover Pen that allows you to remove a tight area of coating around a repair area without affecting the rest of the PCB. You first saturate the tip by tapping it lightly on a surface, which opens the valve and releases solvent. Holding the tip down may oversaturate it, which could lead to solvent flowing into unintended areas.
How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

Articles

Essential Guide to the Identification and Removal of Conformal Coating
This procedure covers the methods to identify the conformal coating so that the ideal removal method can be identified and utilized, then presents a commonly-employed removal procedure with brief summaries of the other removal methods.
Read This Post

Repair Pens Make PCB Repair Fast & Easy
TraceTech board repair system allows technicians of any level to quickly perform quality board repairs in-house, and  without using either expensive equipment or time-consuming and unsightly jumpers. You only need 5 pens to perform critical PCB rework and repair at your workstation: TraceTec...
Read This Post
You did not finish submitting your information to request a sample