Fine-L-Kote SRV Silicone Conformal Coating

Sku Number Name Size Units
Per Case
Price
Per Case
Case
Qty
 
2127-P Stnd viscosity - 1 pint liquid   2 $180.10
2127-G Stnd viscosity - 1 gal liquid   1 $380.51
2127-5G Stnd viscosity - 5 gal liquid   1 $1,564.65
2127-54G Stnd viscosity - 54 gal liquid   1 Call for pricing
2127-P950 High viscosity - 1pt liquid   2 $233.28
2127-G950 High viscosity - 1 gal liquid   1 $456.77
2127-5G950 High viscosity - 5 gal liquid   1 $1,981.90
2127-54G950 High viscosity - 54 gal liquid   1 Call for pricing
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor

A great replacement for Dow conformal coating 12577 & 12620. Low VOC coating – Ideal for moisture, thermal, corrosion and vibration protection

Fine-L-Kote™ SRV is a high gloss, ultra-clear conformal coating that is moisture and abrasion resistant. This coating offers resilient, mechanical stress-reducing PCB protection, and is low VOC. It extends component life by protecting against adverse environments, with resistance to moisture, salt, fungus, and corrosive vapors. Because of its exceptional dirt, dust, and soil repellency, the coated surfaces remain clean longer.

Fine-L-Kote SRV cures quickly at ambient conditions or heat acceleration can speed in-line processing. Ready-to-use viscosities are available: standard (SRV) for manual and selective spray systems, and high viscosity (SRV 950) for dipping processes.

Fine-L-Kote SRV is available in 2 viscosities:
Standard - ready-to-use at 82cps.
High - for extra thick coating, or to dilute as required.

Silicone conformal coating provides excellent protection in a very wide temperature range. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible. Silicone conformal coating isn’t abrasion resistant because of its rubbery nature, but that property does make it resilient against vibrational stresses. Silicone coatings are commonly used in high humidity environments, like outdoor signage. 

Features & Benefits

  • Low VOC
  • Low toxicity – HAPs free
  • Exceptional surface finish – high gloss, superior transparency
  • Moisture resistant
  • Corrosion resistant
  • Vibration resistant & flexible
  • Thermal resistance - 392°F (200°C)
  • Dielectric strength - 720 volts/mil
  • RoHS Compliant

Specifications

  • Meets IPC-CC-830B
  • Passes the laboratory tests of MIL-I-46058C. However, it is not qualified on QPL-46058.
  • UL94 flammability rating V-0
  • MIL-STD 810G salt spray test
  • MS941-04 salt spray test

Applications

FAQ's

What solvent can I use to thin this conformal coating?

Heptane can be used as a thinning agent. Make sure it is anhydrous, so contains as little moisture as possible.

How do you apply liquid conformal coating? (2127, 2125)

Apply to clean, moisture-free surface.  Areas not requiring coating should be masked. Application: Coating may be applied by spraying, brushing, dipping or flow coating.  Allow coating to flow around components. Cure:  Room temperature cure: A 1.0 mil coating will be tack-free in 30 minutes.  Full cure requires 24 hours @ 74˚F (23˚C). Heat cure: 30 minutes @ 90˚F (32˚C) then 100 minutes @ 199˚F (93˚C). An open vessel of water placed in the drying chamber will facilitate curing. UV detectable for QC inspection. Removal:  Coating may be removed by soaking in Electro-Wash® Two Step Cleaner Degreaser. Use CircuitWorks® Conformal Coating Remover Pen for spot removal. After the new component is installed, areas should be cleaned and recoated.

When using conformal coatings in general, what causes a "milky" cure or white "foam" on the substrate?

In almost all cases, the cloudy or milky cure comes from coating in higher humidity conditions. The white foam (from an aerosol) is caused the same way. We have the following suggestions: 1) If possible, allow the substrate and coating material to come to approximately the same temperature when applying. 2) Avoid applications in RH > 60%. High humidity ranges will discolor some coating resins and will start curing others. Besides the aesthetic value, it certainly may affect adhesion to the material. 3) Specifically on the silicone coating, if the resulting application is foamy, increase the focal point of the can, ie back off to about 10 -12” from the substrate & make 2 -3 light passes rather than one heavy pass to coat the board.

What types of coverage areas are to be expected with the conformal coatings in general?

Wet film thickness = Sq. ft. per gal. | 0.1 mil = 16,040 | 0.5 mil = 3,210 | 1 mil = 1,600 | 2 mil = 802 | 3 mil = 535 | 4 mil = 401 | 5 mil = 321 | 6 mil = 267 | 7 mil = 229 | 8 mil = 201 | 9 mil = 178 | 10 mil = 160

What spigot or spout do you recommend for your metal 5-gallon and 55-gallon drums?

Metal 5-gallon and 55-gallon drums are compatible with standard 3/4" and 2" spouts. Ideally use 3/4" for 5-gallon, 2" for 55-gallon.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

Articles

3 Testing Standards That Separate Conformal Coating From Shellac
As an electronic manufacturing services (EMS) supplier, you are required to think on your feet and are forced to gain new capabilities as your customers’ specification change. This can be daunting, especially when you try to bring conformal coating manufacturing in-house and make material an...
Read This Post

How To Identify and Cure The Top 7 Conformal Coating Defects
One of the most common customer support calls we receive is to solve conformal coating application issues. Given the number of variables involved in a conformal coating process (e.g. coating formula, viscosity, substrate variations, temperature, air mix, contamination, evaporation, humidity, et...
Read This Post

The Essential Guide to Conformal Coating
With the increased popularity of miniaturized electronics and circuitry, conformal coating use has skyrocketed to solidify its relevance in a wealth of modern PCB-related applications . Choosing the ideal type of coating and application methods for your electronics is crucial. However, processing ...
Read This Post

Video Guide to Removing Conformal Coating
Techspray has just released a short tutorial that guides you through the step-by-step process of stripping conformal coating from a PCB without damaging components, contacts and the board surface.   Removing Conformal Coating from a Circuit Board Today I’m going to cover the pro...
Read This Post

videos

You did not finish submitting your information to request a sample