Eco-dFluxer SMT200

Request A Sample
Sku Number Name Size Units
Per Case
Price
Per Case
Case
Qty
 
1520-G Eco-dFluxer SMT200 - 1 gal 1 gal (3.8L) 1 $88.33
1520-5G Eco-dFluxer SMT200 - 5 gal 5 gal (19L) 1 $318.11
1520-54G Eco-dFluxer SMT200 - 54 gal 54 gal (205L) 1 $3,049.00
Packaging Order minimum case quantity only. Extra shipping fees may apply.

Eco-dFluxer SMT200 is a water-based, environmentally friendly cleaner that is designed to work in both inline and batch cleaning equipment. It has superior metals compatibility, preventing oxidation and leaving shiny solder joints. Eco-friendly formula reduces shipping and disposal costs. Effective with reduced concentration even on the toughest no-clean, R, RMA, OA and new halide-free fluxes.

High performance cleaning gives you brilliant solder joints and allows you to increase dilution, increase line speeds, reduce waste water, decrease cost per board, and most importantly… eliminate field failures due to ionic contamination!

Eco-dFluxer SMT200 is fully compliant with California CARB requirements. Also compliant with European REACH and WEEE initiatives. It does not contain RoHS restricted substances, SVHC listed substances, or halides.

Features & Benefits

  • Best with sensitive materials (Cu, Al, etc.)
  • High compatibility with common PCB metals & plastics
  • Effective on a wide variety of solders and fluxes, especially Halide-Free flux
  • Nonflammable
  • Ultra rinsable
  • Highly concentrated – 10%-15% dilution
  • Low VOC, zero GWP
  • Non-ozone depleting
  • Halide-Free — Prevents Ionic Contamination
  • Not regulated, non-DG shipping

FAQ's

Can I use a spigot / dispensing spout on the 55-gallon plastic drum?

Yes, HDPE (plastic) drums are designed to accept commonly available 2” threaded spigots / spouts. Spigots are available at distributors, like at https://www.grainger.com/product/GRAINGER-APPROVED-Drum-Tap-6PFN4.


Can I use a spigot / dispensing spout on the 5-gallon carboy?

Yes, the hole in the center of the cap is designed to work with commonly available 2” threaded spigots / spouts. To use: 1) remove the cap, 2) drill a large hole in the center of the threaded hole in the cap, 3) screw the spigot onto the cap, 4) screw the cap back on the carboy, 5) turn the carboy on its side so the spigot points down and check to make sure the spigot isn’t leaking. Spigots are available at distributors, like at https://www.grainger.com/product/GRAINGER-APPROVED-Drum-Tap-6PFN4.


How do I remove the cap from the 5-gallon carboy?

There is a ratcheted ring on the bottom of the cap, which locks the cap into place and prevents it from unscrewing during shipment. To remove, insert a flathead screwdriver between the cap and the ring and pry it loose so the perforations break free. Then remove the ring. It is similar to removing the tamper-proof lock on a plastic jug of milk.


How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

Articles

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Isopropyl alcohol (CAS #67-63-0), also referred to as IPA, isopropanol, and 2-propanol, may be in short supply for the coming weeks or months because of the COVID-19 (Novel Coronavirus) pandemic. This will be particularly challenging for companies using IPA for flux removal, stencil cleaning, and in...
Read This Post

Guide to Solvent and Water-based Ultrasonic Cleaning
When you are removing tough soils like baked-on flux residues or heavy industrial greases, you can have the strongest solvent cleaner in the world (like those offered by Techspray), but you will still need some kind of agitation. You can brush, wipe, and use all manner of elbow grease, but none of t...
Read This Post

Cleaners Developed to Minimize Global Warming Effect
With global warming in the news and greenhouse gases getting more regulatory attention, electronic and industrial manufacturers are on the look-out for ways to reduce carbon emissions. Techspray has been developing products for over a decade that have much lower Global Warming Potential (GWP), witho...
Read This Post
You did not finish submitting your information to request a sample