Eco-Stencil RF Batch Stencil Cleaner

Request A Sample
Sku Number Name Size Units
Per Case
Price
Per Case
Case
Qty
 
1571-G Eco-Stencil RF - 1 gal 1 gal (3.8L) 1 $141.40
1571-5G Eco-Stencil RF - 5 gal 5 gal (19L) 1 $671.69
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Eco-Stencil RF is an effective nonflammable drop-in replacement for isopropyl alcohol (IPA) and other solvents commonly used in rinse-free batch stencil cleaning systems. Unique solvent and DI water blend is effective at removing a wide variety of pastes and adhesives. Higher concentration can be used for more difficult pastes and adhesives.
 
Eco-Stencil RF does not contain ionics, and will not leave contaminants that will change downstream process windows or lead to board failures. It can also be used as a manual and under-stencil cleaner.
 
Eco-Stencil RF batch stencil cleaner has been tested and proven compatible with every part of your stencil — from the frame, screen and stencil to the adhesives binding it together.
 
Eco-Stencil cleaners are fully compliant with CARB (California Air Resource Board) requirements. Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. They do not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides.

Features & Benefits

  • Rinse-free
  • Nonflammable
  • Drop in replacement for IPA
  • Highly concentrated down to 20% dilution
  • Effective at ambient temperature
  • Low VOC, zero GWP
  • Cleans paste or uncured adhesive quickly
  • Effective on all solder pastes: lead, lead-free, aqueous, RMA & No-Clean

FAQ's

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

Articles

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Isopropyl alcohol (CAS #67-63-0), also referred to as IPA, isopropanol, and 2-propanol, may be in short supply for the coming weeks or months because of the COVID-19 (Novel Coronavirus) pandemic. This will be particularly challenging for companies using IPA for flux removal, stencil cleaning, and in...
Read This Post

Guide to Solvent and Water-based Ultrasonic Cleaning
When you are removing tough soils like baked-on flux residues or heavy industrial greases, you can have the strongest solvent cleaner in the world (like those offered by Techspray), but you will still need some kind of agitation. You can brush, wipe, and use all manner of elbow grease, but none of t...
Read This Post

Cleaners Developed to Minimize Global Warming Effect
With global warming in the news and greenhouse gases getting more regulatory attention, electronic and industrial manufacturers are on the look-out for ways to reduce carbon emissions. Techspray has been developing products for over a decade that have much lower Global Warming Potential (GWP), witho...
Read This Post
You did not finish submitting your information to request a sample