Soldering Tips - Weller Compatible

Request A Sample
Sku Number Name Size Units
Per Case
Per Case
MS-0100 SMD flow tip 2.1mm 10 $46.40
MS-3101 Angled SMD 0.6mm 10 $44.00
MS-3110 Screwdriver 0.8mm 10 $43.40
MS-3125 Angled SMD 0.4mm 10 $45.70
MS-3150 Screwdriver, long 1.3mm 10 $43.40
MS-3200 Screwdriver 1.6mm 10 $43.40
MS-3250 Screwdriver, long 2.0mm 10 $43.40
MS-3300 Screwdriver 2.4mm 10 $43.40
MS-3300LF Screwdriver, long-life 2.4mm 10 $55.50
MS-3400 Screwdriver 3.2mm 10 $43.40
MS-3450 Screwdriver, long 3.2mm 10 $43.40
MS-3600 Screwdriver 4.6mm 10 $43.40
MS-4100 Point, micro 0.25mm 10 $43.40
MS-4110 Point, long 0.25mm 10 $45.30
MS-4120 Point 0.25mm 10 $43.40
MS-4140 Conical 0.8mm 10 $43.40
MS-5160 Bevel, micro 1.2mm 10 $43.40
Order from an Authorized Distributor
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Replacement soldering tips for Weller WSL, WD, WS and WSD stations, and Weller WSP and MPR irons. Comparable to Weller's LT series of tips. See cross references or data sheets for tip-to-tip referencing.
Plato is one of the largest manufacturers of soldering tips in the world, producing tips to fit all of the most popular soldering stations. The long life and fast heat recovery of Plato soldering tips increases user effectiveness and decreases production times.

Features & Benefits

  • Fast heat recovery increases soldering speed
  • Longer tip life reduces soldering cost by decreasing tip change overs

Product Dimensions

MS-0100 SMD flow tip

Cross Reference: Weller LTGW 10  Units/Case

SMD flow tip

MS-3101 Angled SMD

Cross Reference: Weller LTHX 10  Units/Case

Angled SMD

MS-3110 Screwdriver

Cross Reference: Weller LTH 10  Units/Case


MS-3125 Angled SMD

Cross Reference: Weller LT4X 10  Units/Case

Angled SMD

MS-3150 Screwdriver, long

Cross Reference: Weller LTK 10  Units/Case

Screwdriver, long

MS-3200 Screwdriver

Cross Reference: Weller LTA 10  Units/Case


MS-3250 Screwdriver, long

Cross Reference: Weller LTL 10  Units/Case

Screwdriver, long

MS-3300 Screwdriver

Cross Reference: Weller LTB 10  Units/Case


MS-3300LF Screwdriver, long-life

Cross Reference: Weller LTB LF 10  Units/Case

Screwdriver, long-life

MS-3400 Screwdriver

Cross Reference: Weller LTC 10  Units/Case


MS-3450 Screwdriver, long

Cross Reference: Weller LTM 10  Units/Case

Screwdriver, long

MS-3600 Screwdriver

Cross Reference: Weller LTD 10  Units/Case


MS-4100 Point, micro

Cross Reference: N/A 10  Units/Case

Point, micro

MS-4110 Point, long

Cross Reference: Weller LT1L 10  Units/Case

Point, long

MS-4120 Point

Cross Reference: Weller LT1 10  Units/Case


MS-4140 Conical

Cross Reference: N/A 10  Units/Case


MS-5160 Bevel, micro

Cross Reference: Weller LT4W 10  Units/Case

Bevel, micro


How To Use Spot Mask for Wave Soldering & Conformal Coating
Say you’re a contract manufacturer of printed circuit boards (PCBs), and your customer just made an engineering change that leaves several thru-hole vias open. If you run it through the wave as is, and solder over the vacant holes, the PCB won’t function properly. How do you keep the p...
Read This Post

Ultimate Guide to Electronic Soldering
What is soldering? Soldering is the joining of two metal surfaces mechanically and electrically, with the use of metal called solder (pronounced “sodder”). Solder secures the connection so it doesn’t break loose from vibration, other mechanical forces and provides electrical conti...
Read This Post

How to Identify Ionic Contamination Sources in PCB Assembly
What causes PCB failure? Whether it's a catastrophic failure or a latent field failure, nothing is more frustrating and expensive than when a circuit board stops functioning. The design was prototyped and thoroughly tested, and yet, has problems once in full production. What happened?! I can&rsq...
Read This Post

5 Best Practices for Cleaning High Reliability PCBs
Aerosol cleaning introduces a continuous supply of clean, unused solvent throughout the entire bench cleaning process of printed circuit boards (PCBs). Aerosol cleaning prevents the introduction of new contaminants. While there are some obvious pros of aerosol cleaning, questions remain as to whethe...
Read This Post
You did not finish submitting your information to request a sample