TraceTech Flux Remover Pen

Spot cleaning for PCB rework and repair

Part # Name Size Units
Per Case
Price
Per Case
Case
Qty
 
2506-N Flux Remover Pen 11.5 ml 12 $153.12
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor
Provides convenient touch­up cleaning of flux residues. Cleans R, RMA, SA, and no­clean fluxes.

Features & Benefits

  • Safe on plastics
  • Cleans lead and lead-free flux residues
  • Rapid evaporation
  • Pen tip allows controlled application
  • Non-ozone depleting

Applications


FAQ's

When should I clean off no-clean flux when soldering?
If it is not fully activated (brought up to solder temperature), you should not leave any ionic residue behind. You might have to clean if...
1. Flux is being used so liberally that it all isn’t being heated along with the solder.

or
2. The non-ionic residue can impede with the function of the devise either short-term or long-term.
How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

Articles

Repair Pens Make PCB Repair Fast & Easy
TraceTech board repair system allows technicians of any level to quickly perform quality board repairs in-house, and  without using either expensive equipment or time-consuming and unsightly jumpers. You only need 5 pens to perform critical PCB rework and repair at your workstation: TraceTec...
Read This Post
You did not finish submitting your information to request a sample